Home | Register | Contact | Verify Email | FAQ |
Blogs | Photo Gallery | Press Release | Results | HoseheadsClassifieds.com


Welcome Guest. Already registered? Please Login

 

Forum: Racing From The Past (go)
Moderators: Racing From The Past


Records per page
 
Topic: Vintage event in Ok.- How it turned out, 1st post-New track-last post Email this topic to a friend | Subscribe to this TopicReport this Topic to Moderator
Page 6 of 6   of  105 replies
Texoma Motor Speedway
MyWebsite
December 29, 2008 at 01:02:04 AM
Joined: 01/09/2008
Posts: 61
Reply
Reply to:
Posted By: welder on October 06 2008 at 05:41:58 PM

When and Where, K.A.R. ran Enid several years ago, I believe Paul Marten set that up. I know several KAR cars would support that. Thanks



Hello Brian, Harold stopped by the track this afternoon and told me that you guys where getting it together. I hope to see you and other at the Races Reunion in January, maybe we can take a ride out to the track and talk a little more.

Ron

Ron Clark
Texoma Motor Speedway
7567 Seymour Hwy
Wichita Falls, Texas 76310
www.texomamotorspeedway.com


Ron Clark
Texoma Motor Speedway
7567 Seymour Hwy
Wichita Falls, Texas 76310
www.texomamotorspeedway.com

brian26
December 29, 2008 at 08:40:26 AM
Joined: 12/03/2006
Posts: 7918
Reply

We are definitely looking forward to it. I'll be at the reunion push,pull or draggin'!



Scotty1n
MyWebsite
February 02, 2009 at 11:40:46 PM
Joined: 11/08/2006
Posts: 71
Reply

Not to change the subject but a pat on the back should go out to Warren who has made this site possible. Without his thought, preparation and organizing our continued rambling it would never have amount to much.

Hang in there Warren! We're all having to tighten the belt up these days so we all understand and a big thanks goes out to you for keeping the site alive. Maybe the next year will go better.

Scotty




brian26
February 03, 2009 at 06:26:58 AM
Joined: 12/03/2006
Posts: 7918
Reply

Warren has made the whole thing work . People are connecting all throughout the corridor like never before. Kansas, North Texas, Oklahoma, etc. In the middle of hard times for many,people are going back ,not so much in time, but picking up where they left off on a good thing.

 

He proved to us that this era is worthy to be remembered. I guess many of us have made this The Home Site, just like a Home Track.

 

Welcome Scotty1n!



brian26
February 03, 2009 at 06:36:40 AM
Joined: 12/03/2006
Posts: 7918
Reply

Warren will be back at some point just to see what he has begun. Let's do our best to make him proud.



redbandana
April 13, 2020 at 07:44:55 PM
Joined: 01/21/2007
Posts: 337
Reply
Reply to:
Posted By: brian26 on October 08 2008 at 11:46:48 AM

This car would be nice to see, it is a rare, legitimate tag-toting Edmunds with an impressive history. He could also make a few sales with his body kits!

 



This is one of our Bodies made and we put it on this car.  it was sold like you see it here to Kieth Roller in Texas.  You can see the #54 on the nose,,,Our molds were Don Edmunds Originals Molds he used and he sent them  with his last 100 Inch Roller he sent to kansas early 70s.  The Molds were  made from the Original Aluminum Body Don put on the #54 car you see in all the Magazinres.  The #54 Number was Painted on the Nose of the Aluminum Body  WITH PAINT and when the Mold were made from that Body the #54 imprint from the Paint comes out on the Nose piece,,when we make a body from  the Molds the 54 comes out on the nose piece likie you see in the picture above..When you prep the Body for Painting the #54 goes away when sanded.. We confermed these Molds with Don by Phone....These Molds fit Edmunds Chasses like a GLOVE.  As pictured above with the Jell Coat still on it.   

 

 


Win as if you are use to it.And lose as if you enjoyed 
it for a change.Its hard to get to the top and alot 
harder to stay there.



Post Reply
You must be logged in to Post a Message.
Not a member register Here.
Already registered? Please Login





If you have a website and would like to set up a forum here at HoseHeadForums.com
please contact us by using the contact link at the top of the page.

© 2021 HoseHeadForums.com Privacy Policy