Forum: Oklahomatidbits.com General Forum (go)
Moderators:  /  David Smith Jr

ive got some parts i want to get out of my garage. everything is make offer price except a cam and lifter set. and i want 50.00 for it. its a 550 solid cam from speedway motors and a set of comp cam lifters with it. been ran about 3 races. i ve got misc springs for mods and weight jacks. i believe to cast iron intakes. a single double ump head good will get casting number steering wheel with pad and some other stuff. all was for factory stock but should be able to use it all in a e-mod. ill update the rest later and remember make offer just want this stuff gone e-mail me at [email protected]

thanks john

complete list:

cam and lifters, hardened pushrods stock length plus 1, holley carb needs rebuilt, tranny cooler, breather top and bottom, 15" fan, steering wheel and pad, carb spacer 1", high volume oil pump and screen new, clutch fork, .030 350 cast dome pistons rough but checked out at machine shop, 7 misc. pistons???, 2 sets tall valve covers 1 with breathers, 492 bare head good, partial ford 9" disk brake kit-2 rotors 3 hats 2 lrg gm calipers and 1 bolt on bracket, tubular upper a arms 12' and 10.5" by 7.75, 1-15 psi air guage, 4-11" rear springs, 1-11" front spring, 1-13" rear spring, 1 cast iron intake and 1 mud off sprayer. like i said make offer on anything except the cam and lifters and that is 50.00

thanks john