HoseHeads.com | HoseHeads Classifieds | Racer's Auction
Home | Register | Contact | Verify Email | FAQ |
Blogs | Photo Gallery | Press Release | Results | HoseheadsClassifieds.com


Welcome Guest. Already registered? Please Login

 

Forum: HoseHeads Sprint Car General Forum (go)
Moderators: dirtonly  /  dmantx  /  hosehead


Records per page
 
Topic: Billy Alley #3 Ironwood Builders Week #2 Email this topic to a friend | Subscribe to this TopicReport this Topic to Moderator
Page 1 of 1   of  0 replies
Billy Alley 3
MyWebsite
April 09, 2013 at 04:39:04 PM
Joined: 03/18/2013
Posts: 5
Reply

April 9, 2013 (by Jeff White) This past weekend saw the Ironwood Builders/Billy Alley #3 take to the track with the ASCS Midwest Region in a “double header” type event at the I-80 Speedway located in Greenwood, NE.“It’s a track I’ve won a few races on and is very close to home.We just love racing in front of our friends and sponsors”said Billy.Friday night would see the car draw the 9 pill, much improved from last week’s 71 pill.“The good draw saw us start on the outside of the front row in the heat race, I just got a bad start.”The 3rd place finish in the heat would put him starting in the 12th position for the A feature.“We made some changes to the car between the heat race to make it better and we watched the track change all night, felt good going in to the feature.”After starting in 12th, Billy would work his way up to 7th challenging for 6th when “something wasn’t right in the motor and I just pulled it in to prevent further damage.”“The car was very fast in the feature and I think we could have challenged for a top 5 finish.”It was not the way the Lincoln, NE driver wanted to finish the night. After Friday night’s motor troubles, getting to the track Saturday wasn’t guaranteed.“With the help of our engine builder and my great crew, we were able to get back out there on Saturday.”Another good draw saw the car starting on the pole for the 5th heat race.“We got a better start than we did Friday and came home 2nd,” sending Billy to the B feature.The B feature saw the Ironwood Builders #3 once again start on the pole.“We fell back to third on the start, I couldn’t get to the bottom in 1 & 2 and it cost us a few positions,” Billy said.“After the 2nd lap I was able to get to the bottom of 1 & 2 and then we started make some good laps and picking off the cars in front of us.”Billy would go on to win the B feature which would put him in the 15th starting spot for the A feature.“After the B feature, the car felt really good and I was pumped to make a run up through the field in the A, unfortunately on the warm up lap for the A feature I felt the same thing happen to the motor as Friday night, so I just pulled it in.” Once again it was not the way the Lincoln, NE driver wanted to finish the night. “We are going to take a couple weeks off, get this motor fixed and hopefully get the new motor going so we have it in 6 weeks or so. I can’t thank everyone enough that came out this weekend and supported this race team, we’ve got a lot of good people behind us and we want to get a win as bad as they do.” Up next:4/27 Butler County Speedway with the Nebraska 360 Sprint Series inaugural event.

We would like to thank our sponsors: Ironwood Builders, Vogt Poured Walls, Carpetland, Klone Farms, Stepping Stone Genetics, K & N Filters, Colby Ridge Popcorn, Astro Buildings, M & K Fence, Kinsler Fuel Injection, Speedway Motors, BUDA, Depicted Image Photography by Jeff White, Troy & Tyler Walvoord Racing

CHECK OUT OUR NEW WEBSITE: WWW.BILLYALLEY3.COM

Follow us on Facebook here: www.facebook.com/billyalleyironwoodmotorsports3

Follow us on Twitter: @billyalley3

If you'd like to receive this press release every week, submit an email to [email protected] with "press release" in the subject line.

#WFO







Post Reply
You must be logged in to Post a Message.
Not a member register Here.
Already registered? Please Login





If you have a website and would like to set up a forum here at HoseHeadForums.com
please contact us by using the contact link at the top of the page.

© 2026 HoseHeadForums.com Privacy Policy