|
|
|
|
|
Topic: wheel offset
|
Email this topic to a friend |
Subscribe to this Topic
| Report this Topic to Moderator
|
|
Page 1 of 1 of 3 replies
|
|
|
|
|
July 26, 2010 at
12:18:33 PM
|
|
|
Joined:
|
05/11/2009
|
|
Posts:
|
5
|
|
|
|
can anyone help me with how to measure the wheel offset
|
|
|
|
July 26, 2010 at
12:47:41 PM
|
|
|
Joined:
|
05/29/2007
|
|
Posts:
|
334
|
|
|
|
With the wheel face down, lay a straight edge across the wheel.
With a tape measure, measure the distance from the bottom of the straight edge to
the mounting pad of the wheel hub. This is your offset.
|
|
|
|
|
July 26, 2010 at
01:14:37 PM
|
|
|
Joined:
|
08/09/2007
|
|
Posts:
|
57
|
|
|
|
For rear splined wheels, you need to add 2" to your measurement. A -5 off wheel will measure 3" to the inside edge of the splined hub (the "-5 off" refers to the center of the hub-the hub is 4" wide @ the splines).
|
|
|
|
|
|
|
July 26, 2010 at
02:29:52 PM
|
|
|
Joined:
|
09/30/2005
|
|
Posts:
|
1387
|
|
|
|
to my knowledge if your ordering replacements or complete wheels Sanders wheels are measured differently when ordering (halfs ect) make sure the salesmen understands your measurement and have them measure it exactly as you (or he) interprets saves alot of grief on shipping and recieving the incorrect part (dimension ) you are looking for, to make matters better, keep the part# on the correct item (once you recieve it) so you dont have to do the measurement shuffel again someday.
|
|
|
