HoseHeads.com | HoseHeads Classifieds | Racer's Auction
Home | Register | Contact | Verify Email | FAQ |
Blogs | Photo Gallery | Press Release | Results | HoseheadsClassifieds.com


Welcome Guest. Already registered? Please Login

 

Forum: HoseHeads Sprint Car General Forum (go)
Moderators: dirtonly  /  dmantx  /  hosehead


Records per page
 
Topic: New 305 Weight Rule For LEE COUNTY ONLY !!! Email this topic to a friend | Subscribe to this TopicReport this Topic to Moderator
Page 1 of 4   of  60 replies
MA305SPRINTS
September 13, 2008 at 10:12:04 AM
Joined: 03/26/2008
Posts: 54
Reply
This message was edited on September 13, 2008 at 11:32:12 AM by MA305SPRINTS

After many phone calls it has been decided to allow roller cams for this event. I f you so choose to do so your weight will be a minimum of 1550 with driver at the end of the race, if you have a flat tappet it will be 1475. And also remember there is no port work allowed on cylinder heads. UNTOUCHED MEANS UNTOUCHED !!! meaning no port work of any kind on intake or exhaust ports !!! Thanks and hope to see you all there.




jwag6
MyWebsite
September 13, 2008 at 11:25:53 AM
Joined: 11/10/2006
Posts: 177
Reply

Untouched means untouched? Does that mean they can't be decked? If they can be decked how much can be taken off?


Jesse Wagler

MA305SPRINTS
September 13, 2008 at 11:30:34 AM
Joined: 03/26/2008
Posts: 54
Reply
Reply to:
Posted By: jwag6 on September 13 2008 at 11:25:53 AM

Untouched means untouched? Does that mean they can't be decked? If they can be decked how much can be taken off?



Sorry should have read no porting !!!! my bad




lostcreek
September 13, 2008 at 12:45:42 PM
Joined: 09/01/2008
Posts: 27
Reply

Burlington based there rules of the mid american rules to get some cars there , It never helped . I never seen rollers in the mid america rules. Bring on the rollers tony paris . Does this mean we can run our little 302. It pumps 305. Let us know so I can get it pulled out of my grandmothers camaro .this week .



MA305SPRINTS
September 13, 2008 at 01:31:07 PM
Joined: 03/26/2008
Posts: 54
Reply
Reply to:
Posted By: lostcreek on September 13 2008 at 12:45:42 PM

Burlington based there rules of the mid american rules to get some cars there , It never helped . I never seen rollers in the mid america rules. Bring on the rollers tony paris . Does this mean we can run our little 302. It pumps 305. Let us know so I can get it pulled out of my grandmothers camaro .this week .



No, it must be a 305 block, second this has nothing to do with tony paris, 3rd we have ran down there when it fit our schedule as did a few of the 34 guys came up and ran with us and i thank them for that, 4th this is something that terry and myself made a decision on this morning after getting calls from other racers wanting to come and race i commend them for being honest and admitting they had roller cams and agreeing to the extra 75#'s they must weigh,



a500tt
MyWebsite
September 13, 2008 at 03:35:32 PM
Joined: 10/04/2005
Posts: 616
Reply

Where can they run a 305 with roller can legally?


LETS RACE BOYS


CAMFAB
September 13, 2008 at 03:48:56 PM
Joined: 06/08/2007
Posts: 241
Reply

OHIO maybe.


Tell me how much money you got and I'll tell you how 
fast you can go!

a500tt
MyWebsite
September 13, 2008 at 04:02:58 PM
Joined: 10/04/2005
Posts: 616
Reply

Thanks Chris, i was just wondering,

I for one think it is a bad deal for racers to race by 1 set of rules all yr (tech or not) and when the better paying races come around the rules get opened up.

I wonder what other rules will be used by race time.


LETS RACE BOYS

CAMFAB
September 13, 2008 at 04:40:23 PM
Joined: 06/08/2007
Posts: 241
Reply

I made a call and the 16hd car weighs 1600 pounds give or take 20 pounds every Saturday night so how is that new weight rule going to help anyone with a flat tappet cam. I work on a 360 car covered in tie stuff and we can't get it to 1475. We have tried.


Tell me how much money you got and I'll tell you how 
fast you can go!


MA305SPRINTS
September 13, 2008 at 04:56:42 PM
Joined: 03/26/2008
Posts: 54
Reply

Are you guys owners or drivers or crew members??? The drivers and owners that have called have been ok with this , and remember this is a short track that wont require a lot of power , the power advantage is very small anyway, we ran against them with our car earlier this year at knoxville and ran well against them, so quit your bitchin and stand on the gas!!! If you are a car owner or driver give me a call , most of the cars at 34 are fast as hell anyways you shouldn't be a bit worried.



harriet_othelo
September 13, 2008 at 05:32:23 PM
Joined: 05/27/2007
Posts: 207
Reply

Are you guys owners or drivers or crew members??? The drivers and owners that have called have been ok with this , and remember this is a short track that wont require a lot of power , the power advantage is very small anyway, we ran against them with our car earlier this year at knoxville and ran well against them, so quit your bitchin and stand on the gas!!! If you are a car owner or driver give me a call , most of the cars at 34 are fast as hell anyways you shouldn't be a bit worried.

Wow, that's a great PR post. Go Mid-America 305's.

 



Wesmar
September 13, 2008 at 06:05:50 PM
Joined: 09/29/2005
Posts: 626
Reply

Harriet, shut up. Jd's just getting frustrated at all the little petty posts that don't amount to anything. People just trying to stir the pot.

Hey if people are running roller cams and have to carry the extra 75 pounds so be it, I think that's fair. OR could it be that some people are afraid of some extra competition???

BTW, you can run roller cams at Knoxville!!




CAMFAB
September 13, 2008 at 06:12:19 PM
Joined: 06/08/2007
Posts: 241
Reply
Reply to:
Posted By: MA305SPRINTS on September 13 2008 at 04:56:42 PM

Are you guys owners or drivers or crew members??? The drivers and owners that have called have been ok with this , and remember this is a short track that wont require a lot of power , the power advantage is very small anyway, we ran against them with our car earlier this year at knoxville and ran well against them, so quit your bitchin and stand on the gas!!! If you are a car owner or driver give me a call , most of the cars at 34 are fast as hell anyways you shouldn't be a bit worried.



Short track! Lee county is one of the fastest 3/8 miles in the mid west. If the cars are so equal why would you give this so called weight advantage to the flat tappet group? I'm not saying a flat tappet engine can't win. But why would you allow cars to run with you that are illegal at every venue within 3 hours of Lee county.


Tell me how much money you got and I'll tell you how 
fast you can go!

CAMFAB
September 13, 2008 at 06:15:52 PM
Joined: 06/08/2007
Posts: 241
Reply
Reply to:
Posted By: Wesmar on September 13 2008 at 06:05:50 PM

Harriet, shut up. Jd's just getting frustrated at all the little petty posts that don't amount to anything. People just trying to stir the pot.

Hey if people are running roller cams and have to carry the extra 75 pounds so be it, I think that's fair. OR could it be that some people are afraid of some extra competition???

BTW, you can run roller cams at Knoxville!!



Right out of Knoxvilles rules.8. Cam/Tappets: Flat-tappet cam, stock-diameter tappets (no rollers, mushroom, radius type tappets)


Tell me how much money you got and I'll tell you how 
fast you can go!

jwag6
MyWebsite
September 13, 2008 at 06:18:16 PM
Joined: 11/10/2006
Posts: 177
Reply

Another good reason for everyone to come togeather and get one set of rules for the 305 class.


Jesse Wagler


CAMFAB
September 13, 2008 at 06:22:46 PM
Joined: 06/08/2007
Posts: 241
Reply

Should be an interesting show. Hey someone just called me and asked if their 360 car weighed 2000 pound could they run too.


Tell me how much money you got and I'll tell you how 
fast you can go!

CAMFAB
September 13, 2008 at 06:40:10 PM
Joined: 06/08/2007
Posts: 241
Reply

JW how close to being ready are you?

Just got a text message from Donnie and he is a proud new father of a baby boy. Ian Thomas Steward born at 5:40 pm 8 pound 10 oz. Mom and baby doing great.


Tell me how much money you got and I'll tell you how 
fast you can go!

jwag6
MyWebsite
September 13, 2008 at 06:43:15 PM
Joined: 11/10/2006
Posts: 177
Reply

So who are the guy's with rollors comming?


Jesse Wagler


jwag6
MyWebsite
September 13, 2008 at 06:49:35 PM
Joined: 11/10/2006
Posts: 177
Reply

Chris not real close. In need of pumps, rearend, motor.


Jesse Wagler

lostcreek
September 13, 2008 at 06:52:11 PM
Joined: 09/01/2008
Posts: 27
Reply

I thought this was a mid america sponsored race, I thought they had a set of rules. Lets just say a roller wins . Then what , I would not think that terry would want anything to do with this change.He already run the sprint invaders off . This is a bad call by a track promotor. sorry.





Post Reply
You must be logged in to Post a Message.
Not a member register Here.
Already registered? Please Login





If you have a website and would like to set up a forum here at HoseHeadForums.com
please contact us by using the contact link at the top of the page.

© 2024 HoseHeadForums.com Privacy Policy