Home | Register | Contact | Verify Email | FAQ |
Blogs | Photo Gallery | Press Release | Results | HoseheadsClassifieds.com


Welcome Guest. Already registered? Please Login

 
Blogs


Submit a New Blog
How to choose the correct cutting piece
Blog Submitted by xzbbvfvbh on 01/23/2019 at 9:14 PM Report Blog
First, the use of cutting pieces First, it is selected according to the occasion in which the dicing sheet is used. The 14 inches cutting disc can be divided into cutting and grinding according to the way of use. Most of the cutting machines are fixed mobile, and the power of the machine is divided into high power (>5.5KW) and low power (<3kw). Cutting speeds are also available in high speed cutting (>80m/s) and normal cutting. In addition, the materials to be cut during cutting are various, such as stainless steel, titanium alloy, ordinary steel, viscous metal, high carbon steel, non-metal, and the like. The performance requirements of the cutting piece are different for different occasions, so it is important to choose a reasonable cutting piece. We need to choose the cutting piece according to the occasion we use, which can increase the safety factor, improve work efficiency and reduce our use cost. Second, the choice of the cutting blade of the ordinary cutting machine Ordinary cutting machines usually refer to fixed cutting machines, cutting machines with a power of <3 kW and a rotational speed of 2900 rpm. Ordinary cutters typically cut workpieces that are less than 50 mm in diameter. However, since the cutting power is small in order to reduce the radial frictional resistance, we usually choose a cutting piece with a thickness of 3.2 mm. The cut piece is thinner and has a certain elasticity, and it feels sharper when cut. Sanxiong Cutting Film Co., Ltd. changed the surface contact into point contact in order to reduce the lateral frictional resistance, and the formulation system added lubricant, which can greatly reduce the frictional heat generated during cutting and improve the durability and sharpness of the cutting blade. Third, high power cutting machine cutting blade selection High-power cutting machines usually use a cutting power of more than 5.5 kW, a speed of 2800 rpm, and a large diameter of the cutting workpiece. Because the torque force during cutting is large, the damage to the cutting piece is also relatively large, so the cutting piece is required to have a certain rigidity. We usually use a 3.8 mm thick cutting piece. At the same time, due to the large cutting diameter, the resistance of the high quality cutting disc supplier will also increase, and the temperature of the cutting surface will be high, so it is very important to reduce the cutting temperature. If possible, add water to cool when cutting. The experiment proves that if the water is cooled during cutting, the durability of the cutting piece can be improved by 1.5-2 times. However, there are some occasions where there is no condition for water cooling. Therefore, when the auspicious cutting piece produces a high-power cutting piece, a powdered coolant is added according to the formula to reduce the temperature generated during cutting, and the life of the cutting piece is improved.
Blog Reply
You must be logged in to Post a Reply.
Not a member. Register Here.
Already registered? Please Login




 

If you have a website and would like to set up a forum here at HoseHeadForums.com
please contact us by using the contact link at the top of the page.

© 2024 HoseHeadForums.com Privacy Policy