Home | Register | Contact | Verify Email | FAQ |
Blogs | Photo Gallery | Press Release | Results | HoseheadsClassifieds.com


Welcome Guest. Already registered? Please Login

 
Blogs


Submit a New Blog
Characteristics And Uses Of Fast Working Grinding Wheel
Blog Submitted by juniperqq on 12/26/2018 at 3:52 AM Report Blog
The fast working grinding wheel has high hardness, high strength and strong grinding ability. It is mainly used for grinding high and hard alloys, non-metallic materials, cutting hard and brittle hard alloys, non-metallic minerals and so on. Such as cemented carbide, ceramics, agate, optical glass, semiconductor materials and wear-resistant cast iron, stone and so on.   The diamond resin grinding wheel has a good polishing effect. The fast working grinding wheel is sharp and difficult to block when grinding. The specific features are as follows: 1.The grinding efficiency is high, and the grinding wheel consumption is relatively slow; 2.Self-sharpness, low heat generation during grinding, not easy to block, reducing the phenomenon of work burns during grinding; 3.China long life grinding wheel has a certain elasticity, which is beneficial to improve the roughness of the surface of the workpiece, and is mainly used for the processes of fine grinding, semi-finishing, knife grinding and polishing; 4.The fast working grinding wheel is low temperature curing, the production cycle is short, the equipment and supply process are relatively simple; because the resin has fluidity, it is easy to form a grinding wheel with complex surface.
Blog Reply
You must be logged in to Post a Reply.
Not a member. Register Here.
Already registered? Please Login




 

If you have a website and would like to set up a forum here at HoseHeadForums.com
please contact us by using the contact link at the top of the page.

© 2024 HoseHeadForums.com Privacy Policy