Ultra-thin resin cutting sheet is made of resin as bonding agent, combined with various materials. It is especially effective for hard-to-cut materials such as alloy steel and stainless steel. Dry and wet cutting methods make cutting precision more stable and at the same time, cutting The choice of material and hardness of the sheet can greatly improve the cutting efficiency and save production cost. The following is a method for the safe use of ultra-thin resin cutting sheets by Henan abrasives manufacturers. 1. Use angle grinder with safety cover, cutting machine with safety cover, wear protective glasses, masks, earplugs, gloves, dustproof clothes; 2. The maximum use cycle speed of the high quality cutting disc supplier, the highest use of the number of revolutions or less, the side of the resin cutting piece must not be used; 3, use the correct flange. No enhancement: 1/3 or more; there is enhancement: 1/4 or more; 4. Before use, confirm that the resin cutting piece has no missing edges, no cracks, no cracks, etc. 5. Store the resin cutting piece in a place without direct sunlight or moisture, and place it horizontally; 6. The fixed object is firmly fixed. If the inner diameter of the resin cutting piece is small and the device does not match, please do not change the hole diameter of the grinding wheel. We now use the resin grinding wheel not only has the advantages of high efficiency and safety, but also has the advantages of good cutting quality and less loss of material to be cut. It is suitable for chemical, shipbuilding, machinery, automobile, construction and other industrial sectors. What should be paid attention to when replacing the resin grinding wheel cutting piece In recent years, the development of abrasives has become faster and faster. In particular, the use of resin grinding discs is more extensive, and the fundamental reason is that they are inseparable from the unique properties of resin grinding discs. Because of the resin grinding wheel It has a high bonding strength, can be used at higher speeds, can withstand large grinding pressure, and is widely used in the burr and rough grinding of steel and foundry industries. + (1) Resin grinding wheel cutting piece wear: any fiber cutting disc Chinese supplier has its own wear requirement. If the wear condition reaches a certain level, it must be replaced with new one. It can't be used for saving material, it is super-wearing. Safety violations. Generally, when the resin grinding wheel is worn to a diameter 10 mm larger than the diameter of the chuck, it should be replaced with a new one. (2), resin grinding wheel cutting piece validity period: the new grinding wheel from the warehouse is not necessarily qualified grinding wheel, even the new one is not necessarily qualified from the manufacturer. Any grinding wheel cutting piece has its effective period, use within the effective period, It is qualified; it is not necessarily qualified if it is used beyond the expiration date. (3) Resin grinding wheel cutting sheet texture: During the use process, if the grinding wheel is found to have local cracks, it should be stopped immediately, and the new grinding wheel cutting piece should be replaced again to avoid causing the grinding wheel cutting piece to break and hurt people.