Resin grinding wheel cutting piece High-strength glass fiber mesh cloth is made into special slice of stainless steel. It is made of high-quality composite corundum abrasive, professional production technology and high-strength glass fiber mesh. The product has a distinctive color appearance. The product does not contain sulfur. Iron, halogen and other elements, the thickness of the product is less than the conventional product. So, what do we need to pay attention to when using the resin EN12413 cutting discs? 1. Before using the ultra-thin resin cutting sheet, please use it for one minute and then use it. When replacing the new type of resin cutting sheet, please idle for 3 minutes before using it. 2, must use the correct flange. No enhancement: 1/3 or more; there is enhancement: 1/4 or more. 3. Use an angle grinder with a safety cover and a cutting machine with a safety cover; 4. When using, be sure to fix the cut material firmly; 5, users must wear protective glasses, masks, earplugs, gloves, dust-proof clothing, etc., to take protective measures. 6. Store the hot sale cutting wheel in a place without direct sunlight or moisture, and place it horizontally; 7. If the inner diameter of the resin cutting piece is small and the equipment does not match, please do not change the hole diameter of the grinding wheel; 8. The maximum use cycle speed of the ultra-thin resin cutting piece is used up to the maximum number of revolutions; 9. Before use, confirm that the resin cutting piece has no missing edges, no cracks, no cracks, etc. 10. Never use the side of the resin cutting sheet. Introducing the resin grinding wheel cutting piece, which has the characteristics of cutting sharpness, saving raw materials, not burning the workpiece, no burr, etc., has been widely used in stainless steel pipe, capillary tube, glass tube, quartz tube, automobile exhaust pipe, brake wire, tungsten wire , molybdenum wire, copper wire and other pipe and wire cutting, for special steel cutting and workpiece slotting have a good effect. The principle of choosing a cutting piece Speaking of cutting pieces, it is not unfamiliar to everyone. Now cutting pieces are widely used in many industries because of their high efficiency, convenience, economy, and other unique properties. However, in the process of use, many people ignore it according to their own Use the occasion to make a reasonable choice of cutting pieces. So, what are the principles we choose to cut? 1. Good uniformity appearance and no crack shape are the basic appearances of high-quality cutting sheets; 2, excellent packaging and printing anti-counterfeiting barcode is the difference between the factory products and counterfeit goods; 3. The lower the static unbalance value of any cutting piece, the better, of course, the greater the difficulty of production; 4. The general rule of cutting and grinding is that the amount of iron to be removed is small, the wear is low, the sharp and durable cutting wheel is too hard, the amount of iron to be removed is too large, the material is too poor, the quality of the inner quality is as little as possible, and the maximum amount of iron is removed. At the same time feel good.