Home | Register | Contact | Verify Email | FAQ |
Blogs | Photo Gallery | Press Release | Results | RacersAuction.com | HoseheadsClassifieds.com
Hoosier Tire Great Plains | Hoosier Mid Atlantic | Racing Warehouse | Precise Racing | Performance Race Parts | Xtreme Race Parts

Welcome Guest. Already registered? Please Login


Submit a New Blog
Grinding process of amphibole rock
Blog Submitted by yoyocrusher on 10/22/2017 at 9:30 PM Report Blog

This name can be used to represent the igneous rocks of amphibolite, can also be used to represent the metamorphic hornblende amphibole is the most common, and is a typical mineral amphibolite. Hornblende is also called "hornblende"". Hornblende is a kind of amphibole mineral. It does not refer to a mineral. Such as calcium magnesium hastingsite, edenite, pargasite belong to ordinary amphibole. Hornblende commonly occur in metamorphic rock and igneous rock, is a very wide distribution of rock forming minerals, containing a large number of hornblende is called amphibolite metamorphic rocks.

In fact, after reasonable utilization of amphibolite also has a very good use, it can be used to produce a bracelet, in addition, hornblende can cast stone raw material ingredients. At the same time in the field of textile industry, cement industry, asbestos paper, filtering agent, bakelite and insulation materials have on purpose. In the construction of commonly used stones, paving can be used, because of its texture, color, hardness and polishing easy to obtain, and so on.

When it comes to the use of amphibolite widely, of course, cannot do without the use of mill equipment, so what kind of equipment can become amphibolite mill equipment? In fact, in the grinding of amphibolite, actually we can use high quality ultrafine mill , grinding material superfine powder grinding machine includes various stones and rocks, such as kaolin, limestone, calcite, marble, barite, gypsum, pyrophyllite, dolomite, feldspar, talc, mica, silica, petroleum coke. Alumina, quartz, etc. more than 100 kinds of materials of cement, the fineness of product can be adjusted between 325-3000 mesh.
Blog Reply
You must be logged in to Post a Reply.
Not a member. Register Here.
Already registered? Please Login


If you have a website and would like to set up a forum here at HoseHeadForums.com
please contact us by using the contact link at the top of the page.

© 2018 HoseHeadForums.com Privacy Policy