Home | Register | Contact | Verify Email | FAQ |
Blogs | Photo Gallery | Press Release | Results | HoseheadsClassifieds.com

Welcome Guest. Already registered? Please Login


Forum: Sprint Car Tech Talk (go)
Moderators: BigDog

Records per page
Topic: Bolt Tensions Email this topic to a friend | Subscribe to this TopicReport this Topic to Moderator
Page 1 of 1   of  2 replies
October 17, 2007 at 06:53:41 AM
Joined: 10/17/2007
Posts: 25

Hi all,

Does anyone know where I would find information about Sprint Car bolt tensions?

A guy has told me to make sure that when I check the torsion arms etc to be careful as over tight is not good either.

He said if they don't have a nut like most arms, approx 22ft lbs and they can be a fraction tighter (25ft lbs) if they have a nut.

Anyone have a list or know if there is a list of these available? Was the guy right with the tensions he gave me?

Thanks in advance,


October 17, 2007 at 08:51:54 AM
Joined: 02/09/2005
Posts: 49

About bolts & torque Id look at manufactures websight for bolts & see if you can find the numbers you need or go to a web sight for torque wrenches usually they provide info r/e bolt spec torque in a given material also talk to the other mechanics that work on sprint cars REMEMBER THERE ARE NO DUMB QUESTIONS

October 17, 2007 at 09:16:10 AM
Joined: 02/09/2005
Posts: 49

FYI heres a web sight 4 U Bolt Science .com hope this helps

Post Reply
You must be logged in to Post a Message.
Not a member register Here.
Already registered? Please Login

If you have a website and would like to set up a forum here at HoseHeadForums.com
please contact us by using the contact link at the top of the page.

© 2020 HoseHeadForums.com Privacy Policy