Home | Register | Contact | Verify Email | FAQ |
Blogs | Photo Gallery | Press Release | Results | HoseheadsClassifieds.com


Welcome Guest. Already registered? Please Login

 
Blogs


Submit a New Blog
Main Production Process of GI Steel Coil
Blog Submitted by juniperqq on 05/21/2019 at 3:12 AM Report Blog
1. Uncoiling and welding Take uncoiling for coiling steel, show the continuous operation needs galvanized coils, conduct electric welding for the belt tail of the former galvanized coils and the lead of the later galvanized coils to ensure the continuous production of the unit. 2. Deoiling and cleaning Cleaning section is kept clear of GI steel coil with spangles made in china surface, remove the rolling oil and zinc powder, in order to get good coating adhesion and surface quality, usually contains spray, scrub, electrolytic cleaning, brushing, spraying, drying and hot air drying facilities, cleaning section for hot-dip galvanized is more important, is the main process to obtain good galvanized volumes process performance. 3. Annealing Recrystallization annealing is carried out on the hard rolled GI steel coils to obtain excellent mechanical properties of the products. According to the atmosphere in the furnace, good properties of galvanized coils are obtained. The annealing furnace is generally composed of preheating, heating, soaking, cooling, and other sections. 4. Air knife zinc layer control According to the zinc pot out of GI steel coil with spangles surface spray liquid, usually air or pure nitrogen, to control the galvanized coil surface coating thickness. 5. Fine grain strengthening treatment Fine grain strengthening treatment is also the process of heating the GI steel coil after galvanized iron sheet to obtain zinc-ferroalloy coating 6. Leveling and pulling the correction To roll galvanized coils with small rolling force, to remove the compromised platform of high carbon steel, to improve the characteristics of GI steel coils, to get the desired roughness of galvanized coils, to improve the shape of strip steel, to obtain excellent flatness and so on. After leveling is the tension correction, tension correction is to carry out the stretch of galvanized coil straightening, the most important is to get a good shape. 7. Post-processing Passivation or other chemical surface treatment of galvanized coils to obtain corrosion resistance, lubrication or other requirements expected by customers, usually by spray extrusion or roller coating drying. 8. The downside According to the requirements of the galvanized coil to carry out trimming, in order to obtain the appropriate width precision. 9. Oil The GI steel coil with spangles made in China is coated with oil to obtain certain rust - proof and lubrication properties.
Blog Reply
You must be logged in to Post a Reply.
Not a member. Register Here.
Already registered? Please Login




 

If you have a website and would like to set up a forum here at HoseHeadForums.com
please contact us by using the contact link at the top of the page.

© 2024 HoseHeadForums.com Privacy Policy