Minnesota Dirt Track Racing
Home | Register | Contact | Verify Email | FAQ |
Blogs | Photo Gallery | Press Release | Results | HoseheadsClassifieds.com


Welcome Guest. Already registered? Please Login

 

Forum: Minnesota Dirt Track Racing Forum (go)
Moderators: StanM


Records per page
 
Topic: UMSS Motors Email this topic to a friend | Subscribe to this TopicReport this Topic to Moderator
Page 1 of 1   of  13 replies
kpwinters
February 16, 2014 at 11:02:06 PM
Joined: 02/11/2005
Posts: 64
Reply


What was ever decided on the Schwanke LSI sealed engine? Can that motor compete in 2014???




ddca4
February 18, 2014 at 12:04:07 PM
Joined: 12/02/2004
Posts: 75
Reply


is it 363.6 Cubic inches or less



kpwinters
February 18, 2014 at 01:05:40 PM
Joined: 02/11/2005
Posts: 64
Reply

According to UMSS website the 6.1 liter is in question?




kpwinters
February 20, 2014 at 12:40:28 PM
Joined: 02/11/2005
Posts: 64
Reply

No one knows???



StanM
MyResults MyPressRelease
February 21, 2014 at 07:31:56 AM
Joined: 11/07/2006
Posts: 5575
Reply
Reply to:
Posted By: kpwinters on February 20 2014 at 12:40:28 PM

No one knows???



Email me privately at [email protected]


Stan Meissner

mozzy4
February 26, 2014 at 04:43:42 PM
Joined: 12/17/2004
Posts: 4
Reply
Reply to:
Posted By: StanM on February 21 2014 at 07:31:56 AM

Email me privately at [email protected]



Is this top secret?




StanM
MyResults MyPressRelease
February 26, 2014 at 05:37:31 PM
Joined: 11/07/2006
Posts: 5575
Reply
Reply to:
Posted By: mozzy4 on February 26 2014 at 04:43:42 PM

Is this top secret?



I gave Kent some phone numbers so he can call the UMSS guys and get a direct answer. 


Stan Meissner

ddca4
February 27, 2014 at 10:50:01 AM
Joined: 12/02/2004
Posts: 75
Reply
Reply to:
Posted By: mozzy4 on February 26 2014 at 04:43:42 PM

Is this top secret?



The secret is out yes they are going to allow the 6.1  litre (aprox. 375 C.I.) motor to run with the 360's



kpwinters
February 27, 2014 at 04:31:58 PM
Joined: 02/11/2005
Posts: 64
Reply

Thats good to here. Will be great to see how this motor runs with the 360s. Glad to hear they are allowing it.




ebecker
February 27, 2014 at 08:34:29 PM
Joined: 09/11/2008
Posts: 71
Reply

Metric system has no place in sprint car racing. lol  Might as well let them run square tails. ( Just kidding guys.) 



jeremyjay46
April 01, 2014 at 12:24:12 PM
Joined: 06/08/2012
Posts: 18
Reply

It was my understanding they were only allowing ONE person to run this engine in 2014 on a trial basis.



ginelmore
MyWebsite
April 02, 2014 at 12:16:48 PM
Joined: 05/09/2008
Posts: 513
Reply

And who is this person ? 




ChadPatterson
MyWebsite
April 02, 2014 at 12:43:08 PM
Joined: 10/08/2007
Posts: 164
Reply
Reply to:
Posted By: ginelmore on April 02 2014 at 12:16:48 PM

And who is this person ? 



Update on LS engine for UMSS winged sprint car division: Per Ron Bernhagen, this engine is an experimental R&D engine being run by ONLY Neal Matuska in 2014. The UMSS will be conducting research and development information on this engine throughout the course of the 2014 racing season at the various tracks the series visits. Neal was willing to make the investment in this engine knowing that it... may or may not be approved for general use for 2015 and on. Neal plans to run a pretty decent amount of the races on the schedule (maybe all of them if things work out). Neal also knows that he may be required to make several changes to his car during the 2014 season in order to collect R&D information on the engine and how it performs under various circumstances. Hopefully this should clarify any of the "rumors" that have been circulating regarding this engine in 2014. For everybody else, it is business as usual. We are not aware of anyone else that is willing to make the investment until the R&D has been completed.



kpwinters
April 02, 2014 at 04:41:01 PM
Joined: 02/11/2005
Posts: 64
Reply

So just how much is the investment in a LS engine???





Post Reply
You must be logged in to Post a Message.
Not a member register Here.
Already registered? Please Login





If you have a website and would like to set up a forum here at HoseHeadForums.com
please contact us by using the contact link at the top of the page.

© 2024 HoseHeadForums.com Privacy Policy