HoseHeads.com | HoseHeads Classifieds | Racer's Auction
Home | Register | Contact | Verify Email | FAQ |
Blogs | Photo Gallery | Press Release | Results | HoseheadsClassifieds.com


Welcome Guest. Already registered? Please Login

 

Forum: HoseHeads Sprint Car General Forum (go)
Moderators: dirtonly  /  dmantx  /  hosehead


Records per page
 
Topic: xXx World's Finest "ChromeMolly Spint Car Chassis" Email this topic to a friend | Subscribe to this TopicReport this Topic to Moderator
Page 1 of 1   of  17 replies
cubicdollars
February 29, 2012 at 06:24:53 AM
Joined: 02/27/2005
Posts: 4443
Reply

http://www.ycmco.com/ProductShow.asp-ID=135.html


 

 

 

They don't even know how to spell sprint car much less chromoly...http://www.ycmco.com



Camberlink
February 29, 2012 at 08:21:19 AM
Joined: 06/30/2009
Posts: 18
Reply

WHO CARES

Did you type that on your "American Made" computer?



BigRightRear
February 29, 2012 at 08:31:19 AM
Joined: 11/27/2004
Posts: 3751
Reply

cubic - at what point in terms of 2012 WINS do the US fabricators take notice to the competitive advantage they exported?


Lincoln 1845 ft/.35 mile T1=118MPH 
Eldora 2287 ft/.43mile T3=135MPH
Port 2716 ft/.51 mile T3=TBD
Grove 2792 ft/.53 mile T3=135MPH
Selinsgrove 2847 ft/.54 mile T1=136MPH
"I didn't move to PA from El Paso in search of better 
weather." Van May


88sprint
February 29, 2012 at 10:12:50 AM
Joined: 08/13/2006
Posts: 347
Reply

I have heard the phrase "beating a dead horse", but this is getting old.....

Are you that upset that XXX is STILL winning races? You always said that XXX suited Haud's driving style as he was always on the cushion and that is why he won races in them. Are you going to try and tell me Lasoski is also known for only running the cushion? If I remember correct, he had the nickname "catfish" for a lot of years....

Also, thanks for the link to the website. It was interesting to see a very nice facility where the chassis are built. Also didn't see and "small women" or child laborers in the photos anywhere. But maybe I wasn't looking as hard as you??



bigallardfan
February 29, 2012 at 12:01:54 PM
Joined: 04/13/2007
Posts: 78
Reply
This message was edited on February 29, 2012 at 12:07:51 PM by bigallardfan

Dude = 4 wins in 8 starts for 2012. 1 WoO win. 3 Allstar wins.

Icebreaker in Lincoln = xXx is 1st (Wilt), 2nd (Marks), 4th (Montieth), 5th (Esh), and 7th (Sell).

Hoffman Team puts Brady into an XXX in 2012.

Closet thing that cubic knows about metal is what the bleachers are made of 25 rows up. He's never raced or owed a car. So, another link for Cubic ... http://www.xxxraceco.com/chassis%20chassis%20results.htm ... that's a s##t load of wins and championships in 2011.



tenter
February 29, 2012 at 12:14:32 PM
Joined: 07/16/2008
Posts: 978
Reply

It looks like a normal facility to me. ISO certified too. That's not as easy to become certified as you may think.

 

 




Smokey880
February 29, 2012 at 12:43:56 PM
Joined: 01/30/2012
Posts: 48
Reply

Not only is it normal, but they are the only chassis manufacturing company too post there test results of the frames! and might I add that they are iso certified by 2 colleges in the united states !! Ask all of your other manufacturing companies for their certs!



cubicdollars
February 29, 2012 at 02:25:19 PM
Joined: 02/27/2005
Posts: 4443
Reply
Best damn "chromemolly" money won't buy.

 

 

 

They don't even know how to spell sprint car much less chromoly...http://www.ycmco.com


BigRightRear
February 29, 2012 at 02:43:43 PM
Joined: 11/27/2004
Posts: 3751
Reply

I think cubic needs to spend more time with the chinese wife he bought off the intenet for 10k and leave race team decisions to people who ACTUALLY RACE.


Lincoln 1845 ft/.35 mile T1=118MPH 
Eldora 2287 ft/.43mile T3=135MPH
Port 2716 ft/.51 mile T3=TBD
Grove 2792 ft/.53 mile T3=135MPH
Selinsgrove 2847 ft/.54 mile T1=136MPH
"I didn't move to PA from El Paso in search of better 
weather." Van May


cubicdollars
February 29, 2012 at 02:52:22 PM
Joined: 02/27/2005
Posts: 4443
Reply

I'm going to call my sweety ChromeMOLLY


 

 

 

They don't even know how to spell sprint car much less chromoly...http://www.ycmco.com


cubicdollars
February 29, 2012 at 03:01:55 PM
Joined: 02/27/2005
Posts: 4443
Reply

But only if she is certified by a member of the multilateral recognition arrangement

http://www.ycmco.com/Company.asp-id=6.html

Everyone loves a good arrangement, even me.


 

 

 

They don't even know how to spell sprint car much less chromoly...http://www.ycmco.com


bigallardfan
February 29, 2012 at 03:05:07 PM
Joined: 04/13/2007
Posts: 78
Reply

Cubic ... did you ever follow up with Mark at XXX related to this thread: http://www.hoseheadforums.com/forum.cfm?ThreadID=62553#thread322405

 

Seems he had a reasonable proposal for you (copied below). Or were you too chicken s##t to follow up?

 

***************************************************

Since I believe you are from PA, I can arrange a meeting for you with Montieth's car owner. You can pick any tube from any of his chassis to be cut out and sent to the testing facility of your choice for testing. TripleX will pay for the delivery of the tube, plus the metal test.

I will have the results sent to you directly from the metal testing facility.

If the chassis tube does not meet the specifications of ASTM E8/E8M-08 (for chemical analysis) and AMS-T-6736B (for tensile strength) for condition N 4130 alloy steel, then you can publish the results. And finally free yourself of the burden of being the champion of informing the racing community of our metal test "lies".

If it does meet the above specifications, then you owe $1,750 for the chassis.

Please contact me at [email protected] to coordinate. Or simply reply to this thread.

*********************************************************

 

 




cubicdollars
February 29, 2012 at 03:09:05 PM
Joined: 02/27/2005
Posts: 4443
Reply

chromemolly is chromoly, a spint car is a sprint car


 

 

 

They don't even know how to spell sprint car much less chromoly...http://www.ycmco.com


cubicdollars
February 29, 2012 at 03:12:36 PM
Joined: 02/27/2005
Posts: 4443
Reply

I just want to know why this thread hasn't been deleted yet? Every other one was.

The truth must hurt like a sob.


 

 

 

They don't even know how to spell sprint car much less chromoly...http://www.ycmco.com


[email protected]
February 29, 2012 at 03:37:36 PM
Joined: 02/28/2006
Posts: 115
Reply
This message was edited on February 29, 2012 at 03:38:16 PM by [email protected]
Reply to:
Posted By: bigallardfan on February 29 2012 at 03:05:07 PM

Cubic ... did you ever follow up with Mark at XXX related to this thread: http://www.hoseheadforums.com/forum.cfm?ThreadID=62553#thread322405

 

Seems he had a reasonable proposal for you (copied below). Or were you too chicken s##t to follow up?

 

***************************************************

Since I believe you are from PA, I can arrange a meeting for you with Montieth's car owner. You can pick any tube from any of his chassis to be cut out and sent to the testing facility of your choice for testing. TripleX will pay for the delivery of the tube, plus the metal test.

I will have the results sent to you directly from the metal testing facility.

If the chassis tube does not meet the specifications of ASTM E8/E8M-08 (for chemical analysis) and AMS-T-6736B (for tensile strength) for condition N 4130 alloy steel, then you can publish the results. And finally free yourself of the burden of being the champion of informing the racing community of our metal test "lies".

If it does meet the above specifications, then you owe $1,750 for the chassis.

Please contact me at [email protected] to coordinate. Or simply reply to this thread.

*********************************************************

 

 



Predictably, I never received a follow up from cubicdollars on this proposal.




Hannity
February 29, 2012 at 03:38:33 PM
Joined: 09/18/2009
Posts: 536
Reply
This message was edited on February 29, 2012 at 03:58:10 PM by Hannity
Reply to:
Posted By: cubicdollars on February 29 2012 at 03:12:36 PM

I just want to know why this thread hasn't been deleted yet? Every other one was.

The truth must hurt like a sob.



Cubic is suffering from a severe case of "diarreah of the mouth".

I agree, I'm surprised that the Moderators haven't cleaned up your spill!

Ignorance is bliss. We are all entitled to our opinions, but when your opinions are replaced with uninformed attacks, you become a liability.

You don't own a XXX chassis, apparently you don't plan to buy a XXX chassis, nor have you been physically or financially injured by a XXX chassis, yet you belittle their efforts with the gusto of a coward.

The triple XXX journey speaks for itself. They've accomplished much more than your small little mind could ever fathom.

To be frank, someone needs to kick your ass!



Twenty8
February 29, 2012 at 03:42:01 PM
Joined: 12/03/2004
Posts: 1330
Reply
Reply to:
Posted By: [email protected] on February 29 2012 at 03:37:36 PM

Predictably, I never received a follow up from cubicdollars on this proposal.



Because he is a puss !



brettco
February 29, 2012 at 03:44:27 PM
Joined: 12/03/2004
Posts: 517
Reply
Maybe (they) will have (him) eliminated. Beggn



Post Reply
You must be logged in to Post a Message.
Not a member register Here.
Already registered? Please Login





If you have a website and would like to set up a forum here at HoseHeadForums.com
please contact us by using the contact link at the top of the page.

© 2024 HoseHeadForums.com Privacy Policy