Home | Register | Contact | Verify Email | FAQ |
Blogs | Photo Gallery | Press Release | Results | HoseheadsClassifieds.com


Welcome Guest. Already registered? Please Login

 

Forum: Racing From The Past (go)
Moderators: Racing From The Past


Records per page
 
Topic: Odd Modified Email this topic to a friend | Subscribe to this TopicReport this Topic to Moderator
Page 1 of 1   of  1 replies
MARK77
June 11, 2008 at 12:02:56 PM
Joined: 05/27/2008
Posts: 4
Reply
This message was edited on June 11, 2008 at 02:07:10 PM by Racing From The Past

 

I am trying to identify my 90" super which I've owned since the mid 80's It appears to be an Edmunds single tube frame, however the front suspension is torsion bar with the bars inside the frame rails. I contacted Don Edmunds and he said the car wasn't built in his shop, but it may have started as a kit. I have photos posted in the gallery on this site under Wyoming Modified. It's got a Halibrand open rear and a Pee Wee Erlbacher steering gear which appear to be original, It also has a wing which I'm not sure is original. I raced it in the 80's until the kids came along and priorities changed. Have a look and see where you think it came from.

http://www.hoseheadforums.com/photoGallery/photoGalleryItems~GalleryKey~269.htm

 




brian26
June 26, 2008 at 01:37:03 AM
Joined: 12/03/2006
Posts: 7918
Reply

Looking at this car tells me it was built in either the late 60's or very early 70's. Thus it couldn't be a Maxwell Like I thought earlier. The roll cage is very different than the Edmunds cars(he did sell kits at one time).

The open driveline really gives a tip as to the era.

The front suspension was an option very few ever tried(Walker in the NCRA territory).

I still think of San Jose supers when I see this car. sargentracing.com might be able to help.






Post Reply
You must be logged in to Post a Message.
Not a member register Here.
Already registered? Please Login





If you have a website and would like to set up a forum here at HoseHeadForums.com
please contact us by using the contact link at the top of the page.

© 2024 HoseHeadForums.com Privacy Policy