Home | Register | Contact | Verify Email | FAQ |
Blogs | Photo Gallery | Press Release | Results | HoseheadsClassifieds.com

Welcome Guest. Already registered? Please Login


Submit a New Blog
Iron ore mill
Blog Submitted by yoyocrusher on 10/11/2017 at 6:58 AM Report Blog

Iron ore is an important raw material of iron and steel production enterprises, because China's Ore Milling Equipment are characterized by lean ore, less ore, ore composition is more complex, ore embedded grain size is mostly thin, so this to the mineral processing process caused a certain The difficulties. Mineral processing enterprises urgently need advanced technology, advanced technology and advanced equipment, to promote the efficient development and utilization of iron ore resources.

Iron ore generally through the broken, Ore Milling Equipment , magnetic separation, flotation, re-election and other procedures to screen out the iron. The equipment investment, production costs, power consumption and steel consumption of crushing and milling operations account for a large proportion of the iron ore dressing process, and due to the crushing and milling operations at the forefront of the entire beneficiation process, the quality of the process is good or bad , A great impact on the follow-up process. Therefore, in order to improve the efficiency of mineral processing technology and product quality while reducing production costs, we must choose high efficiency and low energy quality reliable crushing and milling equipment.

Iron ore mill can be used Raymond Mill, Raymond Mill using advanced new technology for upgrading, the product of the technical indicators greatly improved, the main technical indicators in the leading position, has formed 2R2713, 3R3220, 4R3218, 4R3218, 5R4121, 5R4121, 5R4123, 6R5125 Mill. The product is suitable for grinding limestone, calcite, activated carbon, talc, dolomite, titanium white - powder, quartz stone, bauxite, marble, feldspar, barite, fluorite, gypsum, ilmenite, Clay, clay, kaolin, diabase, coal gangue, wollastonite, slaked lime, zircon sand, bentonite, manganese and other Mohs hardness below 7, humidity within 6% of the various non-flammable and explosive materials , Finished fineness can be 0.18-0.038mm (80-400 mesh) between the arbitrary choice.
Blog Reply
You must be logged in to Post a Reply.
Not a member. Register Here.
Already registered? Please Login


If you have a website and would like to set up a forum here at HoseHeadForums.com
please contact us by using the contact link at the top of the page.

© 2018 HoseHeadForums.com Privacy Policy